Question 1

Q: How much does it cost to clear a blocked drain in Canberra with A & Co Plumbing?

Accepted Answer

A: At A & Co Plumbing, clearing a blocked drain in Canberra typically costs between $250 and $650, depending on the severity and location of the blockage. Our pricing includes a thorough inspection, use of advanced equipment, and efficient drain clearing to ensure the problem is resolved promptly. We prioritize transparent, upfront quotes with no hidden fees, reflecting our commitment to reliable plumbing anytime, anywhere. If additional repairs or specialized services are needed, our technicians will provide clear options and costs before proceeding, ensuring you receive professional and trustworthy service tailored to your needs.

Question 2

Q: Can A & Co Plumbing remove tree roots from drains, and how is this service performed?

Accepted Answer

A: Yes, A & Co Plumbing specializes in removing tree roots from drains, a common cause of blockages and pipe damage. Using advanced drain inspection cameras, we accurately locate root intrusion within your plumbing system. Our team then employs professional-grade mechanical augers or hydro-jetting techniques to safely and effectively clear the roots without damaging the pipes. Following removal, we provide recommendations to prevent future root growth, such as pipe lining or routine maintenance. Trust A & Co Plumbing for reliable, efficient root removal services to restore your drain’s proper function anytime, anywhere.

Question 3

Q: Does A & Co Plumbing use CCTV drain cameras for inspections?

Accepted Answer

A: At A & Co Plumbing, we prioritize the most effective and efficient approach for each plumbing situation. While we do use CCTV drain cameras to accurately diagnose and assess underground or hard-to-reach drainage issues, we do not rely on this technology for every job. Our experienced technicians determine when a CCTV inspection is necessary based on the symptoms and complexity of the problem to provide reliable solutions without unnecessary costs. This ensures that you receive the most appropriate service tailored to your specific plumbing needs.

Question 4

Q: What causes drains to keep blocking, and how can A & Co Plumbing help resolve these issues?

Accepted Answer

A: Drains can repeatedly block due to a variety of common causes including the buildup of grease and fat, hair accumulation, foreign objects, tree root intrusion, and damaged or misaligned pipes. Grease and fat solidify inside pipes, restricting water flow, while hair and debris can create clogs over time. Tree roots can penetrate underground pipes, causing blockages and structural damage. At A & Co Plumbing, we specialize in diagnosing the root cause of persistent drain blockages using advanced inspection tools and provide reliable, long-lasting solutions such as professional drain cleaning, pipe repairs, and preventative maintenance. Our commitment to quality service ensures your drains function smoothly, saving you from frequent disruptions and costly repairs. Contact A & Co Plumbing — reliable plumbing, anytime, anywhere.

Question 5

Q: Does A & Co Plumbing use high-pressure hydro jetting for drain cleaning, and what are its benefits?

Accepted Answer

A: Yes, A & Co Plumbing utilizes high-pressure hydro jetting as a highly effective method for clearing clogged drains and pipes. This technique involves using a powerful stream of water to remove tough blockages, grease buildup, mineral deposits, and debris, restoring your plumbing system to optimal function. Hydro jetting is environmentally friendly, reduces the risk of pipe damage compared to traditional snaking methods, and helps prevent future clogs by thoroughly cleaning pipe interiors. Our skilled technicians assess each situation to determine when hydro jetting is the best solution, ensuring reliable service anytime, anywhere.

Question 6

Q: Can A & Co Plumbing unblock sewer lines, and how do you handle this service?

Accepted Answer

A: Yes, A & Co Plumbing specializes in unblocking sewer lines promptly and efficiently. Our experienced technicians use advanced equipment such as high-pressure water jetting and drain cameras to accurately diagnose and clear blockages, ensuring minimal disruption to your property. We handle all types of sewer line clogs, including tree root intrusion, grease buildup, and debris accumulation. Committed to reliable plumbing anytime, anywhere, we also offer preventative maintenance advice to help avoid future blockages and keep your sewer system functioning smoothly.

Question 7

Q: Do you provide emergency blocked-drain service at A & Co Plumbing?

Accepted Answer

A: Yes, A & Co Plumbing offers reliable emergency blocked-drain services available 24/7 to ensure your plumbing issues are addressed promptly, any time of day or night. Our experienced technicians respond quickly to unblock drains caused by debris, grease buildup, or foreign objects, minimizing damage and restoring proper flow efficiently. We use advanced diagnostic tools and eco-friendly methods to provide lasting solutions, reflecting our commitment to dependable plumbing anytime, anywhere.

Question 8

Q: Can A & Co Plumbing repair a drain if it is cracked or collapsed?

Accepted Answer

A: Yes, A & Co Plumbing specializes in repairing damaged drains, including those that are cracked or collapsed. Using advanced diagnostic tools like video pipe inspection, we accurately assess the extent of the damage before recommending the most effective repair solution. Depending on the severity, we offer options such as trenchless pipe repair, spot repairs, or full pipe replacement to restore your drainage system efficiently and minimize disruption. Our reliable team ensures that all repairs comply with local regulations and industry standards, providing long-lasting results and peace of mind for your home or business.

Question 9

Q: How do I know if a blocked drain is on my property or the government’s responsibility?

Accepted Answer

A: At A & Co Plumbing, we understand how important it is to identify the cause and location of a blocked drain quickly. Generally, drains on your property—such as those connected from your home to the main sewer line—are your responsibility to maintain and repair. The government or local council usually maintains the main sewer lines and drainage systems located beyond your property boundary, often under public roads or common areas. To determine which party is responsible, a professional drain inspection using specialized cameras can trace the blockage location accurately. A & Co Plumbing offers this service to help you identify if the blockage lies within your private plumbing system or on public infrastructure. This clarity ensures you know the right steps to take and avoid unnecessary costs while keeping your drainage system flowing smoothly. For reliable evaluation and prompt service, contact A & Co Plumbing—reliable plumbing, anytime, anywhere.

Question 10

Q: Where does a homeowner’s responsibility for the sewer line end in Canberra, and how does A & Co Plumbing assist with related issues?

Accepted Answer

A: In Canberra, a homeowner’s responsibility for the sewer line typically ends at the property boundary or the sewer junction point where the private connection meets the public sewer main maintained by the local utility. This means that any plumbing repairs, blockages, or maintenance within the property’s boundaries—including the sewer pipes running from the home to this junction—are the homeowner’s responsibility. A & Co Plumbing specializes in identifying and resolving issues within this private section of the sewer system. Our reliable services include thorough inspections, pipe repairs, cleaning blockages, and preventive maintenance to ensure your sewer line functions effectively. We help homeowners understand their responsibilities while providing expert solutions anytime, anywhere in Canberra, minimizing disruptions and protecting your property from costly damage.

Question 11

Q: How can A & Co Plumbing determine whether a blockage is in my private sewer line or the public sewer main?

Accepted Answer

A: At A & Co Plumbing, we use advanced diagnostic methods to accurately locate sewer blockages. Our technicians typically begin with a thorough inspection of your property’s private sewer line using high-resolution sewer cameras. This allows us to visually assess the condition and identify any obstructions within your private sewer system. If the camera inspection shows clear pipes on your property, the blockage is likely in the public sewer main. In such cases, we can help coordinate with the municipal sewer authorities for prompt resolution. By combining camera inspections with flow testing and professional expertise, A & Co Plumbing ensures a precise diagnosis so we can recommend the most effective solution, minimizing disruption and avoiding unnecessary repairs. Reliable Plumbing, Anytime, Anywhere.

Question 12

Q: What should I do if the blockage appears to be in the Icon Water sewer network?

Accepted Answer

A: If you suspect the blockage is within the Icon Water sewer network rather than your property’s plumbing, the first step is to contact A & Co Plumbing for a professional assessment. Our experienced technicians will perform a thorough inspection using advanced tools to accurately locate the blockage. If we determine the issue lies in the Icon Water infrastructure, we will advise you to report it directly to Icon Water for resolution, as they manage and maintain the public sewer lines. Meanwhile, we can provide temporary measures to minimize damage or disruption to your property. At A & Co Plumbing, we prioritize clear communication and reliable service to ensure you understand each step and receive the appropriate support quickly and efficiently.

Question 13

Q: Who is responsible for paying if there is a blocked sewer outside my property?

Accepted Answer

A: At A & Co Plumbing, we understand that dealing with a blocked sewer can be stressful. Generally, if the blockage occurs outside your property boundary—such as in the main sewer line maintained by the local council or utility company—they are typically responsible for the repair and associated costs. However, if the blockage is caused by a connection issue or damage originating from your property’s pipes leading to the main sewer, the responsibility falls to you as the property owner. Our experienced technicians can assess the problem accurately, determine where the blockage is located, and advise you on the next steps. We aim to provide clear guidance and reliable service to help you resolve sewer issues efficiently, minimizing disruption to your home or business.

Question 14

Q: Can A & Co Plumbing use CCTV drain inspection to determine if a blockage is in the private plumbing or the public sewer system?

Accepted Answer

A: Yes, A & Co Plumbing employs advanced CCTV drain inspection technology to accurately identify the location and cause of blockages. This method involves sending a high-resolution camera through your pipes, allowing our technicians to visually assess the condition of your drainage system. Importantly, the inspection can distinguish whether the blockage is within your private plumbing—such as your home’s pipes and lateral drains—or if it extends into the public sewer system managed by local authorities. This precise diagnosis enables us to recommend the most effective solution, ensuring that you only address issues within your responsibility and avoid unnecessary costs. At A & Co Plumbing, we provide reliable, transparent service anytime, anywhere, helping you maintain a clear and efficient drainage system.

Question 15

Q: How can I tell if a sewer blockage is in the public main sewer line rather than my house drain?

Accepted Answer

A: At A & Co Plumbing, Reliable Plumbing, Anytime, Anywhere, we know how frustrating sewer blockages can be. If you notice multiple drains in your home are backing up simultaneously—such as toilets, sinks, and floor drains—it’s a strong sign the problem may be in the public main sewer line instead of your individual house drain. Another key indicator is if sewage is backflowing into your basement or yard manhole covers are overflowing or leaking, pointing to an issue beyond your property boundary. Additionally, slow drainage combined with a foul sewer odor around your property often signals a mainline clog. Our expert plumbers are equipped to diagnose and resolve these issues quickly to restore your plumbing system with reliable service you can trust. If you suspect a main sewer blockage, contact A & Co Plumbing right away to avoid costly damage and get fast, professional help anytime, anywhere!

Question 16

Q: Should I call a plumber or Icon Water first for a blocked sewer in Canberra?

Accepted Answer

A: If you experience a blocked sewer in Canberra, the first step is to determine where the blockage is located. Generally, if the blockage is within your property’s plumbing system—such as drains, pipes, or fixtures—A & Co Plumbing should be your first call. Our reliable plumbing experts can quickly diagnose and resolve blockages on your property side, ensuring minimal disruption. However, if the blockage is suspected to be in the main sewer line owned by Icon Water, such as issues beyond your property boundary or problems affecting the broader sewer network, you should contact Icon Water directly. At A & Co Plumbing, we also assist clients in identifying these issues and can advise when to involve Icon Water, providing a seamless and professional service experience.

Question 17

What hot water issues do you fix?

Accepted Answer

No hot water, lukewarm water, leaks, strange noises, low pressure at hot taps, inconsistent temperature, and systems that run out too fast.

Question 18

Do you repair or replace hot water systems?

Accepted Answer

Both. We’ll assess the unit and give you clear options. If a repair is safe and cost-effective, we’ll recommend it. If not, we’ll recommend replacement.

Question 19

Can you attend same day?

Accepted Answer

We prioritise urgent hot water issues and aim for same-day attendance where possible. We’ll confirm all details ASAP and give you the earliest available time window.

Question 20

What info do you need when I book?

Accepted Answer

Your address, best contact number, what the system is doing (no hot water/leaking/error code), the type (electric/gas/instant if known), approximate age, and where the unit is located.

Question 21

Is there anything I should do before you arrive?

Accepted Answer

If safe: turn off power to the unit (electric) or gas supply (gas), and isolate the water if there’s an active leak. If you’re unsure, tell us what’s happening and we’ll guide you.

Question 22

Why is my hot water system leaking?

Accepted Answer

Common causes include a failed valve, corroded tank, loose fittings, or excessive pressure. Some leaks are repairable; a leaking tank often means replacement.

Question 23

Why do I only get hot water for a short time?

Accepted Answer

It can be a failing element/thermostat, incorrect system size, sediment build-up, or a tempering/mixing valve issue. We’ll diagnose and explain the fix.

Question 24

Do you supply the new hot water system?

Accepted Answer

We can supply and install, or install a customer-supplied unit where suitable. We’ll confirm what’s included before work starts.

Question 25

Are parts included in the service?

Accepted Answer

No. Parts and replacement units are not included unless quoted in writing. We’ll discuss options and get approval before installing any parts.

Question 26

Will you quote before replacing the system?

Accepted Answer

Yes. You’ll get clear options and pricing before any replacement work proceeds.

Question 27

What can affect the final price?

Accepted Answer

System type and size, access, compliance upgrades, valve/pipe condition, disposal of the old unit, and parts availability. We’ll explain this upfront.

Question 28

Do you handle urgent leaks from the hot water unit?

Accepted Answer

Yes. If there’s active leaking or flooding risk, we’ll prioritise stabilising the situation first, then advise repair vs replacement.

Question 29

Do you offer 24/7 emergency plumbing in Canberra?

Accepted Answer

Yes. We provide 24/7 emergency response across Canberra for burst pipes, blocked drains, gas leaks, and no hot water. If it’s urgent, call us and we’ll prioritise your job.

Question 30

Which areas do you service?

Accepted Answer

We service all Canberra suburbs and surrounding areas. If you’re unsure whether we cover your address, get in touch with your suburb and we’ll confirm right away.

Question 31

What types of plumbing work do you do?

Accepted Answer

We handle residential, commercial, and renovation plumbing — from blocked drains and hot water systems to gas appliance installation, leak detection, and full bathroom, kitchen, and laundry renovations.

Question 32

How do you price your work?

Accepted Answer

We explain the procedure and give a clear price guide before we start. That way you know what to expect, and there are no surprises once the job is underway.

Question 33

Do you charge a call-out fee?

Accepted Answer

Yes, we charge a call-out fee to cover travel and initial assessment. If you go ahead with the work, we’ll explain all costs upfront so you can make an informed decision.

Question 34

Are you licensed and insured?

Accepted Answer

Yes. We’re fully licensed Canberra plumbers and gas fitters, and we carry the required insurances to work in homes, businesses, and specialist facilities.

Question 35

How do I book a job?

Accepted Answer

You can call us directly, submit a form on the website, or use our online booking options where available. We’ll confirm your booking time and any details we need before we arrive.

Question 36

My tap is dripping — is it worth repairing or should I replace it?

Accepted Answer

Often a dripping tap can be repaired by replacing internal parts like washers, cartridges, or O-rings. If the tap is very old, corroded, or poor quality, we’ll explain whether a replacement is a better long-term option.

Question 37

Why do my taps make a banging or hammering noise?

Accepted Answer

This is usually “water hammer” — a pressure or flow issue in your pipes. It can be caused by fast-closing mixers, loose pipework, or faulty valves. We can diagnose the cause and install the right fix so the noise doesn’t come back.

Question 38

Can you install new mixer taps or upgrade old tapware?

Accepted Answer

Yes. We supply and install new mixer taps, wall mixers, basin taps, kitchen taps, and outdoor taps. We can work with taps you’ve purchased yourself or recommend quality brands that suit your bathroom, kitchen, or laundry.

Question 39

What causes low water pressure at a tap or shower?

Accepted Answer

Common causes include blocked aerators, partially closed valves, old or corroded pipework, or issues with your hot water system. We’ll test the pressure, find the cause, and explain the best repair or upgrade option.

Question 40

How much does it cost to fix a leaking tap or mixer?

Accepted Answer

Costs depend on the type of tap, access, and whether parts or full replacement are needed. We explain the procedure and give a clear price guide before we start so you know exactly what the repair will involve.

Question 41

How quickly can you attend to a leaking or faulty tap?

Accepted Answer

For urgent leaks or taps that won’t turn off, we prioritise same-day attendance in most Canberra suburbs. For non-urgent upgrades, we’ll book a time that suits you and bring the parts we’re likely to need.

Question 42

Do you guarantee blocked drain clearing?

Accepted Answer

For applicable blocked drains, yes — you offer a continuation-style guarantee (as per your site wording). The key is: same cause, normal use, no foreign objects/misuse.

Question 43

Why do some drains block again soon after being cleared?

Accepted Answer

Usually because it was only partially cleared, the cause wasn’t removed (roots), or the pipe is damaged/holding water. Proper clearing + diagnosis prevents repeat problems.

Question 44

How can I prevent my drains from blocking?

Accepted Answer

Don’t pour grease down sinks, use strainers, don’t flush wipes, and if you have trees near sewer lines, consider periodic maintenance jetting.

Question 45

How often should drains be maintained?

Accepted Answer

If you’ve had root issues or recurring blockages, periodic maintenance is smart. The right interval depends on your property and pipe condition.

Question 46

Do “flushable wipes” cause blocked drains?

Accepted Answer

Yes. They don’t break down like toilet paper and are one of the most common causes of toilet and sewer blockages

Question 47

Can I plant trees near sewer lines?

Accepted Answer

You can, but it’s a risk. Some species are far more aggressive. If you already have trees near the line, proactive maintenance matters.

Question 48

What’s the best way to clear a blocked drain?

Accepted Answer

High-pressure water jetting is usually the most effective because it clears and flushes the line properly. An electric eel can work in some situations, but jetting is often the better long-term clear.

Question 49

Do you use high-pressure water jetting?

Accepted Answer

Yes — it’s one of the main tools for clearing drains properly, especially where roots or heavy build-up are involved.

Question 50

What is an electric eel and when is it used?

Accepted Answer

It’s a rotating cable tool that can break through some blockages. It can be useful, but it doesn’t always clean the pipe walls like jetting does.

Question 51

What is CCTV drain inspection and when is it needed?

Accepted Answer

A camera inspection shows the inside of the pipe. It’s best for recurring blockages, suspected damage, root intrusion, or when you need answers before spending money on repairs. It’s not needed for every single blockage.

Question 52

Can you locate the blockage?

Accepted Answer

Yes — with the right tools and access points, we can often pinpoint where the problem is, especially when CCTV is used.

Question 53

Do blocked drains always mean the pipe is broken?

Accepted Answer

No. Many are build-up or roots that can be cleared. But repeated blockages often indicate an underlying issue (roots, damage, poor fall, collapse).

Question 54

Should I repair, reline, or replace the drain?

Accepted Answer

Depends on what the camera shows. Minor cracks or root entry points may be repairable. Collapsed or badly displaced pipes usually need replacement. We explain what we find and why.

Question 55

Can I use Drain-O / caustic chemicals to clear a blocked drain?

Accepted Answer

Not recommended. They often don’t fix the cause, can damage pipes, and make the job more dangerous for whoever has to clear it afterwards.

Question 56

Does boiling water clear blocked drains?

Accepted Answer

It might help minor grease build-up in a kitchen line — but it won’t clear roots, foreign objects, or mainline blockages.

Question 57

Should I use a plunger?

Accepted Answer

For minor toilet blockages, yes. If it keeps happening, stop plunging and get it diagnosed properly.

Question 58

When should I stop DIY and call a plumber?

Accepted Answer

If there’s sewage overflow, repeated blockages, multiple fixtures affected, flooding risk, or you’ve tried basic steps and it’s not improving.

Question 59

What causes most blocked drains in Canberra?

Accepted Answer

Tree roots are the big one — especially in older suburbs with ageing clay/earthenware pipes. Other common causes: grease/fat build-up, foreign objects, pipe collapse, and sediment in stormwater lines.

Question 60

Can tree roots really damage my drains?

Accepted Answer

Yes. Roots enter through joints/cracks, then grow inside the pipe, catching debris and eventually blocking it. Over time they can crack or collapse the pipe.

Question 61

Are older Canberra homes more likely to have blocked drains?

Accepted Answer

Yes. Older pipe materials and joints + established trees = higher risk of root intrusion and displacement.

Question 62

What causes kitchen drains to block?

Accepted Answer

Grease/fats, food scraps, coffee grounds, and detergent build-up. It usually builds slowly until it suddenly fails.

Question 63

what causes bathroom drains to block?

Accepted Answer

Hair, soap scum, and product build-up. These often start as slow drains.

Question 64

What causes toilets to block?

Accepted Answer

“Flushable” wipes (they’re not), too much paper, sanitary products, kids’ toys, and foreign objects.

Hot Water Systems – Repairs, Replacement & Installation

01

GAS HOT WATER

02

ELECTRIC UNIT

03

HIGH EFFICIENCY OPTIONS

LONG-TERM RELIABILITY

Hot Water FAQs

Q: How much does it cost to clear a blocked drain in Canberra with A & Co Plumbing?

Q: Can A & Co Plumbing remove tree roots from drains, and how is this service performed?

Q: Does A & Co Plumbing use CCTV drain cameras for inspections?

Q: What causes drains to keep blocking, and how can A & Co Plumbing help resolve these issues?

Q: Does A & Co Plumbing use high-pressure hydro jetting for drain cleaning, and what are its benefits?

Q: Can A & Co Plumbing unblock sewer lines, and how do you handle this service?

Q: Do you provide emergency blocked-drain service at A & Co Plumbing?

Q: Can A & Co Plumbing repair a drain if it is cracked or collapsed?

Q: How do I know if a blocked drain is on my property or the government’s responsibility?

Q: Where does a homeowner’s responsibility for the sewer line end in Canberra, and how does A & Co Plumbing assist with related issues?

Q: How can A & Co Plumbing determine whether a blockage is in my private sewer line or the public sewer main?

Q: What should I do if the blockage appears to be in the Icon Water sewer network?

Q: Who is responsible for paying if there is a blocked sewer outside my property?

Q: Can A & Co Plumbing use CCTV drain inspection to determine if a blockage is in the private plumbing or the public sewer system?

Q: How can I tell if a sewer blockage is in the public main sewer line rather than my house drain?

Q: Should I call a plumber or Icon Water first for a blocked sewer in Canberra?

What hot water issues do you fix?

Do you repair or replace hot water systems?

Can you attend same day?

What info do you need when I book?

Is there anything I should do before you arrive?

Why is my hot water system leaking?

Why do I only get hot water for a short time?

Do you supply the new hot water system?

Are parts included in the service?

Will you quote before replacing the system?

What can affect the final price?

Do you handle urgent leaks from the hot water unit?

Do you offer 24/7 emergency plumbing in Canberra?

Which areas do you service?

What types of plumbing work do you do?

How do you price your work?

Do you charge a call-out fee?

Are you licensed and insured?

How do I book a job?

My tap is dripping — is it worth repairing or should I replace it?

Why do my taps make a banging or hammering noise?

Can you install new mixer taps or upgrade old tapware?

What causes low water pressure at a tap or shower?

How much does it cost to fix a leaking tap or mixer?

How quickly can you attend to a leaking or faulty tap?

Do you guarantee blocked drain clearing?

Why do some drains block again soon after being cleared?

How can I prevent my drains from blocking?

How often should drains be maintained?

Do “flushable wipes” cause blocked drains?

Can I plant trees near sewer lines?

What’s the best way to clear a blocked drain?

Do you use high-pressure water jetting?

What is an electric eel and when is it used?

What is CCTV drain inspection and when is it needed?

Can you locate the blockage?

Do blocked drains always mean the pipe is broken?

Should I repair, reline, or replace the drain?

Can I use Drain-O / caustic chemicals to clear a blocked drain?

Does boiling water clear blocked drains?

Should I use a plunger?

When should I stop DIY and call a plumber?

What causes most blocked drains in Canberra?

Can tree roots really damage my drains?

Are older Canberra homes more likely to have blocked drains?

What causes kitchen drains to block?

what causes bathroom drains to block?

What causes toilets to block?

Do you charge a call-out fee?

Can you give a fixed price over the phone?

Why do some plumbers quote cheap on the phone then charge more on site?

How do I know if my drain is blocked?

If multiple drains are slow, what does that mean?

What’s the difference between a blocked sewer drain and a blocked stormwater drain?

does my drain smell even if it’s not fully blocked?